|
No-Rosion
Industrial Grade Cooling System Flush
|
Hardness in water and inhibitors in antifreeze combine with tiny rust particles to form abrasive gels that cause overheating and premature water pump failure.
These coolant gels also adhere to the inner surfaces of cooling systems, particularly in heat exchange areas, and literally "bake on" to form scales and deposits that reduce heat transfer, and cause overheating. Corrosion thrives under these scales, because it is not possible for inhibited coolant to reach the metal surface under the scale. This causes eventual leaks and system failure. Additionally, glycol in antifreeze breaks down over time to form acids that reduce the pH of coolant, and cause corrosion.
No-Rosion Coolant Flush is a powerful Industrial Grade formula that helps remove antifreeze gels and rust particles. It neutralizes weak acids, and cleans/primes metal surfaces inside the cooling system for follow-up treatment with No-Rosion Cooling System Corrosion Inhibitor. It is safe and easy to use, and does NOT contain any strong acids that can actually remain in the system even after the flush is complete, and do more damage than good.
No-Rosion's exclusive formula has previously only been available for
high-dollar, industrial applications. Developed and used for cleaning boiler and cooling tower equipment, No-Rosion now makes state-of-the-art, fully-inhibited flush technology available for your car or truck. It has been formulated to be 100% SAFE for:
YOU, THE USER, as it won't cause irritation of eyes or skin,
THE ENVIRONMENT, as it can be safely flushed to drain,
YOUR COOLING SYSTEM, as it is fully-inhibited and does not contain any strong acids,
ALL METALS, including aluminum, as it's pH is neutral,
PAINT, as sometimes splashing occurs during the coolant flush process.
Tests show that flushing with No-Rosion Industrial Grade Cooling System Flush optimizes the performance of No-Rosion Cooling System Corrosion Inhibitor, allowing it to provide maximum corrosion protection, scale/deposit prevention, heat transfer optimization, and system cleanliness. This is particularly the case if you are beginning your No-Rosion coolant treatment program with a system that has previously been neglected, and is already heavily contaminated.
|